The Most Trusted HVAC Repair in Gahanna – Call Now! (614) 636-5514 . Fall is the time when homeowners should consider cleaning up their home, specifically their heating and cooling system. They can have a furnace and air conditioning cleaning service come in for a price. You can find a lot of do-it-yourself guides on heating and cooling HVAC system cleaning. Make sure that your furnace and AC unit is clean and that a maintenance check-up has been done before you start your furnace. It is best to get this service done professionally by an HVAC Technician in the Gahanna area.
For those people who live in area's of the country that gets cold, it's time to think about your heating equipment. With the technology, new furnaces have today there isn't much to do on them as far as setting them up for winter. In the old days (10 years ago and before) we were told to have our furnaces and boilers checked once a year. But now furnaces and boilers have electronics doing most of the work. There are only a couple of things that a service tech needs to do in today's furnaces and boilers as far as a "clean and check" goes. The old days: In the old days when a service man (politically correct term today is "service tech" this term started about 21 years ago) when out on a "clean and check," he had all kinds of things to do. First, he pulled out all the burners and blew them out with co2, then he checked the heat exchanger for cracks using a mirror, then vacuumed up any dirt he found. He also changed the "thermocouple" (on a standing pilot, where the pilot flame burns all the time, the thermocouple tells the gas valve there is a pilot light, and it's OK to open and start the heat sequence) on the "pilot light" and blew out the pilot light assembly to make sure it would burn clean and that the pilot flame was positioned correctly on the thermocouple, and on the burner pilot runner. So how often do we want our furnaces and boilers checked? That's a tough question. It all depends on the environment your furnace is running in. If your furnace or boiler is running in an environment that has a lot of dust or animal hair, then it might be worth it to have your furnace checked once a year. If your furnace is running in a relatively clean environment, you can probably get away with 2 or 3 years of not having to have to spend the money to have a clean furnace checked. Don't forget that these new furnaces shut down when they spot the slightest problem. Some tech guys feel the only real time for homeowners to have their furnaces ( don't forget we're talking new furnaces, not the old clunkers) checked, is when they don't start. They don't think the cost justifies what your getting in return. But in the end, it's the choice of the homeowner to decide how often they have their heating equipment checked.
Spring furnace maintenance is really all about making sure your furnace is in good shape for next fall/winter. It also ensures that when it's time to turn on your air conditioning in the summer, your system is ready to go. A majority of Canadian households run their furnaces from October to March or April. That's about 6-7 months of furnace use, on average. Those who have HVAC systems that produce both heats in winter and cool air in summer run their systems nearly year-round.No matter what kind of system you have at home, the constant use means wear and tear on parts. Running a furnace or HVAC system is just like running a car: the more you use it, the faster it will wear out. This is why your system needs regular maintenance, just like your car does. Your system should be "tuned up" at two critical points each year: pre-fall/winter (before you need to use your heat) and spring (when you transition from using heat to turning off your furnace and using your air conditioning). Here's what you should be focusing on in the spring:3) Get your system inspected. You should do this at least once per year. If you do it in the fall, it may not be necessary to do it again in the spring. However, spring is an ideal time to attend to this task. This way you won't freeze if it turns out that there is something wrong or if a part needs replacing. Few things are worse than waiting until the first cold snap of autumn to turn on the furnace, only to discover that it's not working, and now you're stuck with no heat while you wait for a new part to be ordered and installed. For the same reasons, springtime is a great time to replace an old furnace or HVAC with a new one. Replacing a furnace usually takes some time, anywhere from days to weeks. Doing it in spring means you won't go without heat and air conditioning during other times of the year when you really need it.
Heating & Cooling Experts in Columbus