The Most Trusted HVAC Repair in Berea – Call Now! (614) 636-5514 . Fall is the time when homeowners should consider cleaning up their home, specifically their heating and cooling system. They can have a furnace and air conditioning cleaning service come in for a price. You can find a lot of do-it-yourself guides on heating and cooling HVAC system cleaning. Make sure that your furnace and AC unit is clean and that a maintenance check-up has been done before you start your furnace. It is best to get this service done professionally by an HVAC Technician in the Berea area.
So you think you want to clean that oil furnace or oil boiler yourself. You have watched the service guy do it and really didn't think that it looked all that hard. You stick the hose of your shop vac into the chamber and all the soot is broadcast all over the place! Yikes, what did he have that you don't in there? When cleaning an oil fired appliance you need to remember that the dust created by the unit is very fine and will just go right through the filters that are standard to most shop vac's. You will have to go to the store and find some special equipment to catch all that fine black dirt. It is very easy to find if you know what to look for. One final thing for you guys. If you are planning to use the shop vac that your wife uses for her everyday cleanups, you may want to rethink this. After you get done with it and have black soot all over the nozzle and such you will be sleeping in the doghouse if your wife goes to use it and ends up with black on something good of her's. You have now been warned. Don't blame me for anything that happens to you as a result of not heeding this warning.
Most people think it takes a qualified heating technician to check their gas furnace or know how to clean a gas furnace. Truth is there are several things a homeowner can do to check and clean their own furnace. A furnace should be checked at the very least, once a year. Typically just before the cold season when there will be a need for the furnace to run. However, it is a good idea to also check it once during the heating season, just in case the filter gets dirty. The furnace filter is probably the number one thing a homeowner can do to keep their furnace running efficient and clean. Most filters are good for about 2-3 months, depending on the cleanliness of the air, or if there are pets. Inspect the furnace filter every other month, and replace it when the original color of the filter media can't be seen through the grayish colored dirt and/or pet fur. The use of a vacuum cleaner with extension to carefully clean off any dust, dirt or spider webs from the furnace. Careful not to break and components, or pull any wires loose. Put the panels back on. Turn power and gas back on. Re-light pilot as needed.
Heating & Cooling Experts in Cleveland