The Most Trusted HVAC Repair in Bexley – Call Now! (614) 636-5514 . Fall is the time when homeowners should consider cleaning up their home, specifically their heating and cooling system. They can have a furnace and air conditioning cleaning service come in for a price. You can find a lot of do-it-yourself guides on heating and cooling HVAC system cleaning. Make sure that your furnace and AC unit is clean and that a maintenance check-up has been done before you start your furnace. It is best to get this service done professionally by an HVAC Technician in the Bexley area.
When it comes to window AC repairs, Often there will be constant and unusual noises from a window AC unit. These noises can be rather annoying, giving off a loud hum or rattling. Thankfully, many times, this is a problem that can be easily fixed, especially in cases where the noises are caused by loose parts. In this article, we will provide a few tips to help further evaluate the situation. Equipment Needed:• Fin Comb • Screwdrivers • Shims • Various Replacement Parts • Shop Vacuum • Garden Hose • Light Oil • Weather Seal • Wrenches • PuttyStep 1 - The cause of the noise may simply be caused by the unit not being positioned in the window frame properly. If it happens to be loose, the shaking of the unit may cause it to jolt against the frame. In order to check this issue, turn the unit on, press your hand against the window glass, and listen to hear if there is a difference in the noise. If you happen to notice a difference, simply place a weather seal firmly around the unit. You may also try placing shims between the unit and frame. Step 5 - Damages coil fins have also been known to cause a humming sound. To fix, remove the cooling coil housing located near the back of the unit. Clean each coil with the brush attachment of a vacuum, and carefully place the teeth of a fin comb between a set of fins that are undamaged to find the correct spacing. Next, slide the comb through the damaged fins to straighten. There are many AC repair complications that will require professional help. If you cannot fix the unit yourself contact a professional in your area.
So you think you want to clean that oil furnace or oil boiler yourself. You have watched the service guy do it and really didn't think that it looked all that hard. You stick the hose of your shop vac into the chamber and all the soot is broadcast all over the place! Yikes, what did he have that you don't in there? When cleaning an oil fired appliance you need to remember that the dust created by the unit is very fine and will just go right through the filters that are standard to most shop vac's. You will have to go to the store and find some special equipment to catch all that fine black dirt. It is very easy to find if you know what to look for. One final thing for you guys. If you are planning to use the shop vac that your wife uses for her everyday cleanups, you may want to rethink this. After you get done with it and have black soot all over the nozzle and such you will be sleeping in the doghouse if your wife goes to use it and ends up with black on something good of her's. You have now been warned. Don't blame me for anything that happens to you as a result of not heeding this warning.
Heating & Cooling Experts in Columbus