The Most Trusted HVAC Repair in Euclid – Call Now! (614) 636-5514 . Fall is the time when homeowners should consider cleaning up their home, specifically their heating and cooling system. They can have a furnace and air conditioning cleaning service come in for a price. You can find a lot of do-it-yourself guides on heating and cooling HVAC system cleaning. Make sure that your furnace and AC unit is clean and that a maintenance check-up has been done before you start your furnace. It is best to get this service done professionally by an HVAC Technician in the Euclid area.
Most people think it takes a qualified heating technician to check their gas furnace or know how to clean a gas furnace. Truth is there are several things a homeowner can do to check and clean their own furnace. A furnace should be checked at the very least, once a year. Typically just before the cold season when there will be a need for the furnace to run. However, it is a good idea to also check it once during the heating season, just in case the filter gets dirty. The furnace filter is probably the number one thing a homeowner can do to keep their furnace running efficient and clean. Most filters are good for about 2-3 months, depending on the cleanliness of the air, or if there are pets. Inspect the furnace filter every other month, and replace it when the original color of the filter media can't be seen through the grayish colored dirt and/or pet fur. The use of a vacuum cleaner with extension to carefully clean off any dust, dirt or spider webs from the furnace. Careful not to break and components, or pull any wires loose. Put the panels back on. Turn power and gas back on. Re-light pilot as needed.
First, let us say we have been installing furnaces since 1989 with next to NO repair problems. This includes the 92% versions. We ran a new house HVAC business for 10 years installing not only the furnace, air conditioner or heat pump but all the ductwork, wiring, in other words, a complete turnkey installation. We did this on between 150 - 200 new homes a year for this 10 year period. The size of the flue pipes ( diameter ) runs between 2" and 3". The size of the furnace and the length of the runs of pipe, as well as the number of elbows, will dictate which diameter of the pipe is needed. Here again, if the installer AND the estimator don't understand this, you can count on problems! In other words, if 3" pipe will be needed SOMEONE has to be sure there is enough clearance to allow for installation AND the 1/4" pitch.
Heating & Cooling Experts in Cleveland