The Most Trusted HVAC Repair in Fairview Park – Call Now! (614) 636-5514 . Fall is the time when homeowners should consider cleaning up their home, specifically their heating and cooling system. They can have a furnace and air conditioning cleaning service come in for a price. You can find a lot of do-it-yourself guides on heating and cooling HVAC system cleaning. Make sure that your furnace and AC unit is clean and that a maintenance check-up has been done before you start your furnace. It is best to get this service done professionally by an HVAC Technician in the Fairview Park area.
There are a lot of components that make up the central air conditioning unit, and in order to troubleshoot what is wrong with you're a/c, you need to understand a wide variety of components that make up the system including refrigeration, electricity, electrical components, electric mechanical controls and a/c components. Since the system can be complex it is probably better to have a trained HVAC specialist look at and diagnose the unit rather than attempt repairs yourself, but you should also be familiar enough with your ac unit so you understand how to maintain it. There are two types of a/c units, the package system, in which all the components are in one unit, and the split system. The one unit ac is relatively rare and most consumers are more familiar with and use the split unit in which one part of the unit is installed in the home and the other part is connected with wires, as well as refrigeration lines and is located outside of the home. Ice is another element of nature that does not respond kindly to the outdoor air conditioning components. Ice can be created from the morning dew freezing in the cold morning air, just enough to cause the contact points to weld together and freeze up. This can also happen in the colder winter months when the second part of your split ac unit sits unprotected in the elements; therefore, it's always a good idea to be preventive and weatherize your unit to prevent damage that may not become apparent until summer.
So you think you want to clean that oil furnace or oil boiler yourself. You have watched the service guy do it and really didn't think that it looked all that hard. You stick the hose of your shop vac into the chamber and all the soot is broadcast all over the place! Yikes, what did he have that you don't in there? When cleaning an oil fired appliance you need to remember that the dust created by the unit is very fine and will just go right through the filters that are standard to most shop vac's. You will have to go to the store and find some special equipment to catch all that fine black dirt. It is very easy to find if you know what to look for. One final thing for you guys. If you are planning to use the shop vac that your wife uses for her everyday cleanups, you may want to rethink this. After you get done with it and have black soot all over the nozzle and such you will be sleeping in the doghouse if your wife goes to use it and ends up with black on something good of her's. You have now been warned. Don't blame me for anything that happens to you as a result of not heeding this warning.
Heating & Cooling Experts in Cleveland