The Most Trusted HVAC Repair in Kent – Call Now! (614) 636-5514 . Fall is the time when homeowners should consider cleaning up their home, specifically their heating and cooling system. They can have a furnace and air conditioning cleaning service come in for a price. You can find a lot of do-it-yourself guides on heating and cooling HVAC system cleaning. Make sure that your furnace and AC unit is clean and that a maintenance check-up has been done before you start your furnace. It is best to get this service done professionally by an HVAC Technician in the Kent area.
Air conditioners regulate the temperature indoors during hot days, keep out pollutants and contaminants, and maintain comfortable humidity levels in the home. Despite the amount of use AC units get, many homeowners wait until small issues become large problems to schedule an air conditioning repair service. Here are a few common reasons for repair calls. Lack of maintenance when it comes to keeping an HVAC unit in good working condition, regular maintenance is key. A routine tune-up can help keep units working all summer long. When homeowners neglect regular maintenance, small issues can become costly headaches. Remember, technicians can spot damage before it causes a major issue. Moisture Inside the System Air conditioning units is designed to reduce the risk of moisture building up in the system. A central drain line funnels excess moisture outside, where it can do no damage to the home. However, if the drain line gets clogged, water can pool inside the system, leading to corrosion, mold, and even electrical issues. Furthermore, the moisture build-up can attract pests that can damage other parts of the home. These repairs require an experienced professional and should not be handled by the homeowner. Overused and Overworked AC Units during the hottest days of the summer, many homeowners run their systems continuously. While this does keep homes cooler, it can also damage the air conditioning unit. The constant use places a lot of strain on the system and can cause severe damage when the unit is not properly maintained. An overused unit may even stop working, resulting in an expensive air conditioning repair that could likely have been avoided with a routine maintenance appointment. Improperly Sized AC UnitsWhen a technician installs a unit, they always look at the size of the home to determine which unit will work best. If a unit is too small to cool a home properly, the air conditioner may break, forcing the homeowner to call an air conditioning repair technician to assess the problem. It's important to note that unless the unit is upgraded or supported by additional units, an undersized AC will likely break again after repairs. Faulty WiringWhen an unlicensed contractor or handyman installs an AC unit, they may not be familiar with the proper safety protocols for installation and could wire the unit incorrectly. If this is the case, the air conditioner won't work as efficiently and may even be a fire hazard. Homeowners who notice that their unit runs without cooling the room or constantly trips the circuit breaker should schedule a consultation immediately. Avoid these common repair problems by scheduling routine maintenance each year. Call a local AC repair expert to be prepared for summer before it arrives.
For those people who live in area's of the country that gets cold, it's time to think about your heating equipment. With the technology, new furnaces have today there isn't much to do on them as far as setting them up for winter. In the old days (10 years ago and before) we were told to have our furnaces and boilers checked once a year. But now furnaces and boilers have electronics doing most of the work. There are only a couple of things that a service tech needs to do in today's furnaces and boilers as far as a "clean and check" goes. The old days: In the old days when a service man (politically correct term today is "service tech" this term started about 21 years ago) when out on a "clean and check," he had all kinds of things to do. First, he pulled out all the burners and blew them out with co2, then he checked the heat exchanger for cracks using a mirror, then vacuumed up any dirt he found. He also changed the "thermocouple" (on a standing pilot, where the pilot flame burns all the time, the thermocouple tells the gas valve there is a pilot light, and it's OK to open and start the heat sequence) on the "pilot light" and blew out the pilot light assembly to make sure it would burn clean and that the pilot flame was positioned correctly on the thermocouple, and on the burner pilot runner. So how often do we want our furnaces and boilers checked? That's a tough question. It all depends on the environment your furnace is running in. If your furnace or boiler is running in an environment that has a lot of dust or animal hair, then it might be worth it to have your furnace checked once a year. If your furnace is running in a relatively clean environment, you can probably get away with 2 or 3 years of not having to have to spend the money to have a clean furnace checked. Don't forget that these new furnaces shut down when they spot the slightest problem. Some tech guys feel the only real time for homeowners to have their furnaces ( don't forget we're talking new furnaces, not the old clunkers) checked, is when they don't start. They don't think the cost justifies what your getting in return. But in the end, it's the choice of the homeowner to decide how often they have their heating equipment checked.
Heating & Cooling Experts in Ohio